img English
中国
韩国
韩国
韩国
韩国
韩国
NEWS CENTER
Check category
/
/
/
What problems should be paid attention to when using the air purifier for smoke

What problems should be paid attention to when using the air purifier for smoke

What problems should be paid attention to when using the air purifier for smoke

(Summary description)The air purifier for smoke can be used for the purification of smoke and dust generated in welding, polishing, cutting, grinding and other processes, as well as the recovery of rare metals and valuable materials, etc.

Information

The air purifier for smoke can be used for the purification of smoke and dust generated in welding, polishing, cutting, grinding and other processes, as well as the recovery of rare metals and valuable materials, etc. It can purify a large number of small metal particles that are harmful to the human body suspended in the air. It has the characteristics of high purification efficiency, low noise, flexible use, and small footprint.

air purifier for smoke

The air purifier for smoke is suitable for arc welding, carbon dioxide shielded welding, MAG welding, carbon arc gouging welding, gas melting cutting, special welding and other workplaces that generate smoke.

After purchasing a smoke purifier, be sure to read the instruction manual carefully or consult the manufacturer. Only by mastering some precautions of the smoke purifier can it be better used.

1. It is strictly forbidden to store and use air purifier for smoke equipment in places with high temperature (above 60°C), high humidity, inflammable and explosive, and liquid substances, so as to avoid equipment failure and combustion accidents.

2. There is high voltage inside the air purifier for smoke product, non-professionals are prohibited from disassembly and maintenance.

3. It is strictly forbidden to touch the high-speed rotating impeller with body parts or other objects.

4. It is forbidden to cover or block the air inlet and outlet during use.

5. When replacing the filter element of the air purifier for smoke, ensure that the sealing ring, pull buckle, and smoking pipe are installed tightly to prevent air leakage.

6. Regularly check and replace the primary, middle and high-efficiency filter elements to avoid clogging of the air purifier for smoke, which may cause work failure and equipment damage. If you do not use it for a long time, please disconnect the power supply and encapsulate the filter element to avoid contact with air.

7. Please use the original filter element and accessories, so as not to affect the service life and purification efficiency of the air purifier for smoke.

8. Keep the air flow velocity around the smoking hood at a minimum.

9. It is advisable to keep the distance between the port of the smoking hood and the point of smoke generation at 10-15cm.

10. Minimize the bending of the smoking pipe, and increase the arc as much as possible even if it is bent.

Keyword:

Foshan Shunde Xiangtai Scavenging Material Industrial Co.,LTD.

Add:Block 1, No.9 Industrial Road Fengjian Industrial Zone,Xingtan Town, Shunde District, Foshan City, China
Phone:
18666556820 / 18124810081 / 13425728223
E-mail:sales02@cheuktai.com / sales01@cheuktai.com                            manager@cheuktai.com

All rights reserved:Foshan Shunde Xiangtai Scavenging Material Industrial Co.,LTD.     粤ICP备2020089710号      Support: www.300.cn